Blog Elements

You can display blog posts in various ways with the “Blog Post” element/shortcode. You can see one example here and even more at the blog main menu item of this demo.

GVS KBus KNX Room controller

Switching relay: 4 folds with 16A output; 8 folds with 6A output; Functions: staircase lighting, switching, timing and logic control Dimming: 2 folds output with max. load current:1A / fold Functions: relative / absolute dimming…

GVS KBus KNX LED Constant Voltage 4A 12v-24v Dimmer

Switching Relative/Absolute dimming Status report Scene Function Staircase Lighting Preset Function Input voltage 12-24v DC (constant voltage)  

GVS K-Bus KNX 4 FOLDS 1-10V Dimmer Actuator

Switching Relative and absolute dimming Status report, error report Scene and preset function Staircase lighting function Preset a Brightness value after bus voltage recovery Passive DC 0/1-10V drive mode Manual operation…

GVS K-Bus KNX IP interface V1.0

Connect the EIB / KNX system with the Ethernet network via an Ethernet RJ45 interface in the front It uses an Ethernet RJ45 interface to connect with LAN network ETS :-  Manual:

KNX/DALI Gateway, 2-Fold

One or Two output channels 64 DALI devices per channel 16 DALI scenes control per channel 16 Groups control per channel Various status feedback, e.g. switch, brightness, operation hours etc. Fault detection of lamps and ballasts…

GVS K-Bus RS485 to KNX Converter

Open communication protocols for the RS485 interface To receive and send communication telegram in accordance with preformatted For converting the telegram from the 485 bus to the KNX/EIB telegram, and sending to the KNX/EIB system,…